Air tubes Okay, this is my first assembly patch, but I think it could be useful. By applying this patch you can create "air tubes" by using blocks with Air: Fool X-ray. To create tubes going up as shown in the video you need an air fool x-ray tile with a BTS of 04 on the floor and at the top, than air fool x-ray tiles with a BTS of 03 in the middle. To create down tubes you do that same, but use tiles with a BTS of 06 on the top and bottem, and BTS of 05 in the middle. I include a video of them in action, and a screenshot of how to apply them. Source and ips patch is also attached. Enjoy ---------- Start with morph ball If patched to an UNheadered ROM this will enable morph ball right from the beginning. (Special thanks to Kejardon, without his help I would have been completely lost...)